Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter to the British Power Boat Co. concerning proposed gun mounting specifications.

Identifier  ExFiles\Box 175\3\  img069
Date  12th August 1940
  
To Rm.{William Robotham - Chief Engineer}
c. to Ve.

Ev.{Ivan Evernden - coachwork}7/JH.

12th. August, 1940.

British Power Boat Co.
Hythe,
Southampton.

re Gun Mountings.

Dear Sirs,

When we saw your representative on the Range at Eastney Portsmouth last week, we promised to inform you as soon as possible the diameter of the bolt circle at the base of our proposed mountings.

We have reached some preliminary conclusions.

Our proposal is a 33" diameter bolt circle with 24 5/8 diameter bolts, the width of the base flange will be approximately 4" with an outside diameter of 34 1/2.

We would be glad therefore if you would give us your views on such a mounting fixing.

Yours faithfully,

H.I.F. Evernden,
Chief of Design,
Gun Installation Section
for Rolls-Royce Ltd.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙