From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Wiring alterations for the Goshawk II magneto installation, including changes to clips and casings.
| Identifier | ExFiles\Box 45\3\ Scan207 | |
| Date | 1st January 1928 | |
| V4075 BY/HEB{H. Biraben}4/W.1/1/23. To EIC. (2 prints) C. to EFC. He JAN 1 1928 RECEIVED X.4075. "GOSHAWK II". WIRING - SEC: 7360. ---------------- Kindly note, when fitting Magnetos to Goshawk II Chassis it has now been arranged to run the Magneto Cable out of a slot in the Wiring Casing on the Dash, so that no modification is necessary to the standard Conduits in the Frame. By Alteration No. 3899/F.{Mr Friese} we altered the Arrgt. Drg. F.51989 to show this. We enclose herewith one Print of F.52087-Side Wiring Casing on Dash (N.S.) 1 off per chassis, and when Magneto is fitted only one off F.51112-Side Wiring Casing on dash, will be required. Also, in accordance with LeC. 1634 we attach hereto one Blueprint of:- F.51958-Bottom Clip for Wiring Casing. 2 off per chassis. This will be used on chassis 501 onwards. This Clip was designed to replace the Aluminium Clips F.51111, which collapsed in service. However, as the Dies were made we alterd the Material of F.51111 from Aluminium to Steel, and these will be used up to chassis 500. BY/HEB.{H. Biraben} | ||