Confirmation to produce a drawing for an experimental cast aluminium intake bend for a 4¼-litre Bentley.
| Identifier | ExFiles\Box 85\4\ scan0192 | |
| Date | 3rd August 1938 | |
| 208 To By {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} from Rm {William Robotham - Chief Engineer} /CTS. {C. Trot Salt - Carburation} Rm {William Robotham - Chief Engineer} /CTS. {C. Trot Salt - Carburation} 3/MH. {M. Huckerby} 3.8.38. BENTLEY AIR INTAKE. This is to confirm that you will produce a drawing for an experimental intake bend, to be made in cast Aluminium. This is for use on a standard 4¼-litre Bentley, using the T.T. Induction System, which is to be connected to a standard air silencer by means of this new intake bend. For further particulars see Rm {William Robotham - Chief Engineer} /CTS. {C. Trot Salt - Carburation} Rm {William Robotham - Chief Engineer} /CTS. {C. Trot Salt - Carburation} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).