Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Summary of modifications required for the rear hydraulic shock dampers on a Phantom II chassis.

Identifier  ExFiles\Box 16\4\  Scan277
Date  11th April 1931
  
c. Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
X7520.
BY/HEB{H. Biraben}2/M.11.4.31.

PHANTOM II. CHASSIS.
REAR HYDRAULIC SHOCK DAMPERS SEC:715.

SUMMARY OF MODIFICATIONS REQUIRED FOR PRODUCING
TO SPEC: SUPPLIED BY Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer} TO PRELIMINARY DRG:
F.83611.

Kindly receive one Blue Print of each of the following parts.-

@ F.83619 End Cover for Main Cylinder RH.{R. Hollingworth} 1 off, replacing F.81056.
@ F.83620 " " " " LH.{Mr Haworth} 1 " " F.81057.
F.83621 Valve Cover Plug (High Pressure) 2 " " F.83159.
F.83622 " " " (Low ") 2 " " F.83160.
F.83628 Joint Washer (Top Cover). 2 " " F.79924.

@ An extra print of this part attached for
Pattern Shop.
Please instruct the above parts as required
together with the following existing parts.-

F.83565 Piston for Shock Damper. 4 off, replacing F81058.
F.83608 Intermediate Lever. 2 " " F82926 and F82742.

F.83548 Pin for Piston. 4 off.
F.83549 Spring for Piston. 4 "
F.83550 Wearing Pad. 4 "
E.1268 Taper Pin. 4 "
d K.4304 2-BA. Nut. 4 "
d G.50613 Spring Washer. 4 "
F.83578 Inner Ball Pad. 2 " replacing F79758.
F.83580 Locating Washer for Ball Pin. 2 "
F.83581 Distance Piece in Connt Tube. 2 " replacing F79391.
F.83582 Ball End Pin. 2 " " F80398.
F.83583 Main Lever R.H. 1 " " F82489.
F.83584 " " L.H. 1 " " F82490.
F.83585 Bush (Large) Main Cylinder. 2 " " F79389.
F.83586 Top Cover for Main Cylinder. 2 " " F79387.
F.83587 Connecting Tube. 2 off, replacing F79392, F79423, F79393, F79760.
F.83599 Inner Ball Pad (Top). 2 off, replacing F.81150
F.83600 Gland Pressure Bush. 2 " " F.79914.
F.83398 Spring for Connecting Tube. 2 "

d To be Cadmium Plated.

The remainder of this section is as instructed in our L.O.P. F.79925 with the exception of the following parts.-

F.74566 Connecting Link. 4 off.
F.81060 Nut for Piston. 2 "

-Contd-
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙