Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Widening of cams for valve gear to improve wear and lubrication.

Identifier  ExFiles\Box 13\2\  02-page008
Date  25th July 1928
  
BY.{R.W. Bailey - Chief Engineer} from E.{Mr Elliott - Chief Engineer}
c. to BJ. Hs.{Lord Ernest Hives - Chair}

X7090

E2/M25.7.28.

EAC.10 VALVE GEAR. X.7060
X.7090

BY/CGH{W Clough}7/K19.7.28. Re. Lec.2464, and in reply to your memo. we wish to make the cams .700 wide instead of .5. This transfers the bearing surface overlap to the cam, and increases the wearing face, and we believe also improves the lubrication.

The question of grinding the end cam near the collar requires looking into, but we believe you will find it possible to accommodate the wider cam at this point.

E.{Mr Elliott - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙