New, improved tappet spanner design for standardization.
| Identifier | ExFiles\Box 79\2\ scan0132 | |
| Date | 27th March 1914 | |
| ( COPY ) Re. Tappet Spanner. Na. {Mr Nadin} Mr.Dalley. EP {G. Eric Platford - Chief Quality Engineer} 20/L5514. With further reference to this matter, this is to confirm my consultation with you re. the above, to the effect that I think the spanner I handed to you is an improvement on the one which is now being proposed for standardisation, which I am now not so pleased with as I was at first. The sample I handed to you is of & course, only a roughly made type/one which could be improved as regards light- ness, etc. This new spanner has been brought to my attention by the engine gear quietener working in the Test Dept. I should be glad, therefore, if you could put this matter forward again to be considered for standardisation in preference to the one referred to. EP. {G. Eric Platford - Chief Quality Engineer} R.R. 235A (150 H) (V.V. 782 27-3-14) G.C. 0442. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).