Ordering of forgings for a 20 HP crankshaft.
| Identifier | ExFiles\Box 74\3\ scan0211 | |
| Date | 28th February 1919 | |
| To Da. {Bernard Day - Chassis Design} from E. {Mr Elliott - Chief Engineer} c. to EH. c. to EFC. {E. Fowler Clarke - Electrical Engineer} X.3208.-RE 20 H.P. CRANKSHAFT. We send you herewith drawing No. Lec. 1060 giving you sufficient information to enable the crankshaft forgings to be put on order. We ask that the forging allowance may be generous at each end of the crank to accomodate any alterations that may be required. The drawing actually shows finished dimensions, and forging allowance should therefore be added all over. Would you kindly instruct the necessary material. E. {Mr Elliott - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).