From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Torque multiplication and distribution ratios for a brake linkage scheme.
| Identifier | ExFiles\Box 182\M20\M20.2\ img048 | |
| Date | 19th May 1924 | |
| R.R. 493A (40 M) (SL 42 12-7-23). J.H. D.{John DeLooze - Company Secretary} ORIGINAL EXPERIMENTAL REPORT Expl. No. 9940 REF: Hs{Lord Ernest Hives - Chair}/ACL/1/19.5. To DA.{Bernard Day - Chassis Design} from Hs.{Lord Ernest Hives - Chair} S E C R E T. 49940 EAC.111. BRAKE LINKAGE "ADOPTED" SCHEME. Referring to your DA{Bernard Day - Chassis Design}3/M9.5.24. with attached figures for levers to give the required ratios of front braking and rear braking, we note that you assume in your calculations a torque multiplication by the servo of 3.9. From our experiments on the M.DES.60 servo with 45° thread, we find that the average torque multiplication due to the servo only is approx. 2.4. As the distribution ratio depends upon this figure, we propose to test the servo used on this scheme and adjust the leverages to give the required distribution of 3/3 5/4 and 5/5. For the purpose of experiment we do not see that it is necessary to alter the ratio of the arms of the balancer lever for the above distribution ratios. Hs{Lord Ernest Hives - Chair}/ACL. | ||