Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification for the thickness of a ring and the adjustment of a setting plate.

Identifier  ExFiles\Box 93\3\  scan0369
Date  27th August 1937
  
-2-
Rm{William Robotham - Chief Engineer}/NRC.{N. R. Chandler}17/JH.27.8.37.

This ring may be from .060 to .070 thick, the exact thickness is not vital, so long as the thickness is uniform.

When using the standard R.R. setting plate, which is .325 thick, the finger should be set at 1.000, which will give approximately .815 when the new plate is fitted.

Rm{William Robotham - Chief Engineer}/NRC.{N. R. Chandler}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙