Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of fitting and assembly criticisms from the experimental department with remarks from the production department.

Identifier  ExFiles\Box 111\4\  scan0048
Date  8th August 1938 guessed
  
-3-

Fitting and Assembly Criticisms
Raised Expl. Dept.

Production Dept. Remarks

10. When the brake drum is assembled to the axle shaft it is extremely difficult to remove owing to its being located.

Can extractor screw holes be provided in brake drum as with other manufacturers

11. With the design PD.125 the brake assembly must be built up in position on the axle, this, from the production point of view is undesirable, and we suggest that the design be reconsidered with the object of producing the brakes as an independent unit.

If brakes could be built up as a separate unit, assembly on rail would be facilitated.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙