From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Technical drawing of a hose connection elbow.
| Identifier | ExFiles\Box 128\2\ scan0213 | |
| Date | 24th October 1933 | |
| NOTES:- 1.-REMOVE ALL BURRS AND SHARP CORNERS. 2.-DO NOT SCALE DRAWING. 3.-RIGHT IS RESERVED TO MAKE CHANGES AT OUR OPTION. 4.-AMERICAN PROJECTION IS USED UNLESS OTHERWISE STATED. 5.-TOLERANCES ON FRACTIONAL DIMENSIONS FOR MACHINING OPERATIONS OR PRESSED STEEL ARE + OR - .010 UNLESS OTHERWISE SPECIFIED. FOR FURTHER INFORMATION REFER TO DRAWING OFFICE. DRAWING ANNOTATIONS: 1 1/4" +.000 -1/8" 9/32"R 1" 1/16"R 3/32"R 1/2" DIA M 3/13 3/4" 7/16" 1/8"R 1/16 CHAMFER AT 45° 2 HOLES DRILL 3/8" DIA. 3/8" STD. AMER. TAPER PIPE THREAD. 11/16" DIA CHANGES TABLE: No.: 2313 / 15/b, WAS: Bronze Casting, CHKD: H, DATE: 10-7-33 WAS: TRACED TO INCLUDE C 31-10-32, CHKD: FWH, DATE: 31.10.32 TITLE BLOCK: ALTN. No.: 89/3 ISSUE No: 2 (Issue 1 crossed out) BENDIX-PERROT BRAKES LTD. TYSELEY. BIRMINGHAM. TITLE: HOSE CONNECTION ELBOW DATE (lower left): 31-10-32 MATERIAL: HOT BRASS STAMPING DRAWING No.: B.K.10785. DATE: 24 OCT 1933 ISSUE: 1 | ||