From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Instructions for the assembly of two Bentley Dynamo armatures, detailing required parts.
| Identifier | ExFiles\Box 168a\3\ img160 | |
| Date | 5th March 1935 | |
| E.H.G. [struck through] S-J [struck through] c. Hs{Lord Ernest Hives - Chair}/Wst. Y6142 BY/RD1/W.5.3.35. BENTLEY DYNAMO. SEC.8070 - ARMATURE. Will you please put in hand two armatures in accordance with L.O.P. DB.{Donald Bastow - Suspensions}980, print herewith. The special parts required are :- DB.{Donald Bastow - Suspensions}982. Armature Stamping. 142 off. DB.{Donald Bastow - Suspensions}983. Thick Armature Stamping. 2 off. An additional blue print of the above is attached hereto, to enable them to be ordered from Messrs. Baldwin. The remaining parts on the L.O.P. are standard pieces. The armatures should then be built up and wound in accordance with :- DB.{Donald Bastow - Suspensions}980. Armature Assembly. DB.{Donald Bastow - Suspensions}981. Armature Coil. BY/RD. | ||