From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Instructions for a spring-loaded bearing bush on a new style of starter motor.
| Identifier | ExFiles\Box 2\12\ B002_X168-page165 | |
| Date | 1st November 1913 | |
| ROLLS-ROYCE LIMITED. INSTRUCTIONS. 12283 To: Mr Royce Customer's No. X168 Re: Screw-in of the spring-loaded Bearing Bush S.B.q.11 on our new style of starter S-Rq.PR5D. S.S.9S with its work length of approx 10 1/2". with one of the wind rate each side to up to about 2S, which was into order by F.{Mr Friese} Royce & J.{Mr Johnson W.M.} Sankey. J.{Mr Johnson W.M.} Judge has tried one of these men this afternoon slowly & consistent slow-coil all along the stroke works. With these coil I want you to make a pattern & go ahead at once. between the spring & its bearing surface. It is essential to have some lubricating. The new starter is complete & to go to install is waiting & was telephoned to so act promptly. Signed This Sheet must be filed on completion of the work. | ||