From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts list for various spanners and tools with material specifications and applications.
| Identifier | ExFiles\Box 20\8\ Scan059 | |
| Date | 22th June 1921 | |
| TOP HEADER: DS-TS-0-008-BTI A.R.A. REFERENCE/DATE: F7268/1 22.6.21 TABLE COLUMNS: NOTES, ALTERATION, PART NO., TITLE, DRG. SIZE, NO. PER SET, MAT'L SPEC., ROUGH MATERIAL TABLE ROWS: - E39, UNION SPANNER, II, 1, S/M 201, E39AS FORGING - -700 EB1, COUPLING NUT SPANNER, II, 1, S/M 201, EB1AS FORGING - E4272, VALVE TAPPET SPANNER, I, 1, S/M/HC 205, .105"x.190 THICK STRIP STOCK 2.875 LONG - E7658, TOMMY BAR, I, 1, S/M 201, .250 DIA BAR 3.625 LONG - E9048, TOMMY BAR, I, 1, S/M 201, .312 DIA BAR 4.750 LONG - E12645, TOMMY BAR, I, 1, S/M 201, .437 DIA BAR 7.500 LONG - E17733, TOMMY BAR, I, 1, S/M 201, .250 DIA BAR 1.750 LONG - 1-275 E17734, BOX SPANNER, I, 1, S/M 206, .562 DIA BAR 2.000 LONG - NOTES: AMERICAN BOSCH; 1-25 E17227, WATFORD MAGNETO SPANNER, I, 1, BOUGHT OUT WITH MAGNETO - 26 ON AE17227, AMERICAN BOSCH MAGNETO SPANNER, I, 1, BOUGHT OUT WITH MAGNETO - 1-100 F248, PETROL TANK SPANNER, II, 1, S/M 206, FORGING - NOTES: C; F2892, 3/8 x 1/4 SPANNER, II, 2, S/M 206, BOUGHT OUT - F2893, 5/16 x 3/8 SPANNER, II, 1, S/M 206, BOUGHT OUT - F2894, 1/4 x 5/16 SPANNER, II, 1, S/M 206, BOUGHT OUT - FG372, 2.B.A. & 5.B.A. SPANNER, I, 1, S/M 206, FG372AS - FG955, AXLES & PIVOTS BOX SPANNER, II, 1, S/M 206, 2.00 O.D x 1.562 I/D TUBE 4.250 LONG - 1-25 F7253, SPARK PLUG SPANNER, II, 1, S/M 206, 1.500 DIA BAR 4.000 LONG - 26 ON AF7253, SPARK PLUG SPANNER, II, 1, S/M 206, BOUGHT OUT - F7836, SHOCK ABSORBER SPANNER, II, 1, S/M 206, F7836AS FORGING - 1-100 F7675, UNION NUT SPANNER FOR F7460, II, 1, S/M, BOUGHT OUT - -801 G2899, SPANNER FOR REAR AXLE TUBE NUT, II, 1, S/M 201, G2899F FORGING - NOTES: A; G2900, BAR FOR SPANNER FOR G2899, I, 1, S/D 203, BOUGHT OUT - NOTES: A; G3024, TAPER PIN FOR G2899, I, 3, S/D 206, .312 DIA BAR .875 LONG - U708, VALVE PLUG SPANNER, II, 1, S/M 201, U708AS FORGING - U718, EXTENSION TUBE, II, 1, S/D 203, BOUGHT OUT - U1805, SILENCER SPANNER, II, 1, S/M 201, U1805AS FORGING - 1-175 AE4278, KEY FOR ADJUSTING SCREW, II, 1, S/M 206, F4278AS FORGING - 1-210 G3425, SPECIAL STUD, I, 1, S/M 206, .687 DIA BAR 3.550 LONG - 1-210 G3426, COLLAR, I, 1, S/M 206, 1.125 DIA BAR .625 LONG - 1-210, SPANNER FOR WIRE WHEELS, N.D., 1, BOUGHT OUT - 101-525 AG16, GREASE GUN ATTACHMENTS, II, 1, BOUGHT OUT - 9/16 HAMMER, N.D., 1, BOUGHT OUT - 4" SCREW DRIVER, N.D., 1, BOUGHT OUT - 276-525 A2523, TRANSMISSION OIL GAUGE, II, 1, S/M 201, .250 DIA BAR 13.000 LONG - LARGE ADJUSTING SPANNER, N.D., 1, BOUGHT OUT - LIFTING JACK & HANDLE, N.D., 1, BOUGHT OUT - 176 ON A1693, KEY FOR CROSS ST TUBE SET SCREW, N.D., 1, BOUGHT OUT - 211-400 A1627, SPANNER FOR AMERICAN WIRE WHEELS, BOUGHT OUT - 276 ON A1990, BOX SPANNER (GUDGEON PIN SCREW), I, 1, BOUGHT OUT - 276 ON A2237, 1/4 x 3/8 OPEN END WRENCH, N.D., 1, BOUGHT OUT - 276 ON A2238, 7/16 x 1/2 OPEN END WRENCH, N.D., 1, BOUGHT OUT - ALTERATION: B; 401 ON A2347, SPANNER FOR AMERICAN WIRE WHEELS, II, 1, BOUGHT OUT STOCK PARTS SECTION: COLUMNS: ALTERATION, LIST NO., TYPE, WHERE USED, NO. PER SET, MAT'L SPEC. - 1-210, K4922, LOCKNUT, G3425/G, 1, S/M - 150 ON, N.D., CANVAS TOOL BAG, 1, Bought Out, Handwritten: Dwight, Connection Bag - N.D., 7" PLIERS, Bought Out, Handwritten: FITTERS REMARKS SECTION: THIS LIST APPLIES TO THE FOLLOWING - SERIES: 20, NO. OF CHASSIS: 275, CHASSIS NUMBERS: 1-275 - SERIES: 21, NO. OF CHASSIS: 250, CHASSIS NUMBERS: 276-525 - SERIES: , NO. OF CHASSIS: 275, CHASSIS NUMBERS: 526-800 NOTES: - "A" ASSEMBLE TOGETHER WITH G2899 SPANNER. - "B" THIS SPANNER IS COMPOSED OF THE FOLLOWING NEW DETAILS. A2348/49/50/51/52. - "C". 1 OFF UP TO CHASSIS 525 - Handwritten pencil note near F2892: 'D' ASSEMBLE TOGETHER WITH F2893 SPANNER BOTTOM SECTION: ARRANGED FOR AMERICAN PRODUCTION - CHANGED BY: H.A.Od, CHECKED BY: H.A.Od, APPROVED BY: R.A.B, DATE: 5.26.21 - ARRANGEMENT, NUMBER, SH. TITLE: SPANNERS AND TOOLS SHEET INFO: NO. OF SHEETS: 1/2, SHEET: 1 DRAWING NO: F7268 7400 | ||