Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposing alterations to the recommended list of tools and spares for both chassis tool kits.

Identifier  ExFiles\Box 16\6\  Scan030
Date  4th June 1930
  
HY.{Tom Haldenby - Plant Engineer} FROM Hs{Lord Ernest Hives - Chair}/AJL.
c. to SG.{Arthur F. Sidgreaves - MD} WOR.{Arthur Wormald - General Works Manager}
c. to EP.{G. Eric Platford - Chief Quality Engineer} MX.{John H Maddocks - Chief Proving Officer}
c. to HH. OY.

x 7580

Hs{Lord Ernest Hives - Chair}/AJL.1/WJ.4.6.30.

x7580
x5580

TOOL KITS (BOTH CHASSIS).

With reference to Hy{Tom Haldenby - Plant Engineer}?/123.5.30. we propose to make the following alterations to the recommended list of tools and spares.

(1) Small adjustable spanner to be supplied with all chassis.(There are nuts on the chassis which can only be undone by using this tool).

(2) Hydrometer - not considered necessary on any chassis.

(3) M.Y. Brush for distributor head (D.30109)- this should be supplied with all chassis.

We are issuing a standardisation to cover the recommended alterations agreed upon.

Hs{Lord Ernest Hives - Chair}/AJL.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙