Axle side-to-side movement and a proposal to transfer springs below the axle.
| Identifier | ExFiles\Box 80\3\ scan0052 | |
| Date | 1st March 1920 guessed | |
| v Jor/Hy {Tom Haldenby - Plant Engineer} 2/1.15315. -2- axle wanders about from side to side on the drums over a range of perhaps 6" to 9", there- fore if the bump strikes the wheel when it is at the limit of its side movement a fairly heavy lateral shock must be given to the spring support brackets. As suggested by you we are transferring the springs to a position below the axle and also fitting split main plates to the rear springs. Hy. {Tom Haldenby - Plant Engineer} (Watermark: DICKINSON BOND) | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).