From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Correction and alteration of a bow spring type control model for a relief valve.
| Identifier | WestWitteringFiles\P\July1926-September1926\ Scan037 | |
| Date | 19th July 1926 | |
| ORIGINAL TO BY FROM E.{Mr Elliott - Chief Engineer} Copy to - HS.{Lord Ernest Hives - Chair} E2/M19.7.26. BOW SPRING TYPE OF CONTROL FOR RELIEF VALVE. V8205 In reply to your memo. BY9/H15726., it was never intended that one side of the spring bow should become negative, and all our drawings shew the two sides of the bow of equal length. We have taken the model apart and corrected this point and it now works perfectly. At the same time we have transferred the washers from under the fixing screws to a position beneath the spring which has the advantage of increasing the flexibility of the lower member of the bow, and which alteration should be adopted. We are returning the altered model herewith for your inspection. E.{Mr Elliott - Chief Engineer} | ||