From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design of a conical distance piece for the side spare wheel carrier.
| Identifier | WestWitteringFiles\U\2January1930-September1930\ Scan197 | |
| Date | 4th July 1930 | |
| CH. FROM DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork} Copy to - DH.{D. Henderson - Showroom} Copy to - HS.{Lord Ernest Hives - Chair} SIDE SPARE WHEEL CARRIER DA{Bernard Day - Chassis Design}/EV{Ivan Evernden - coachwork}4/M4.7.30. X7772. X7600. Thank you for OY6/DW17630. We do not use the tyre well to square up the wheel. It has always been assumed that the conical aluminium distance piece would square itself up in the conical part of the hub. We do not like the suggestion on SK.400., as when putting the wheel in position there will be nothing to hold thedistance piece in. At present the cone wedges it in. If it is feared that the cone will not square itself up properly in the hub we think it should be made say twice or 3 times the length. Would Derby kindly arrange to give us their views on this, and if necessary to elongate the cone as we suggest. DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork} ORIGINAL RECEIVED 7 JUL 1930 HS{Lord Ernest Hives - Chair} | ||