Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Changing the cantilever bearing on the gearbox to a forged piece.

Identifier  ExFiles\Box 12\1\  01-page086
Date  28th August 1928
  
BY.{R.W. Bailey - Chief Engineer} from DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork}

c. to BJ. Wor.{Arthur Wormald - General Works Manager} Hs.{Lord Ernest Hives - Chair}

X7420

DA{Bernard Day - Chassis Design}/EV{Ivan Evernden - coachwork}4/28.8.28.

RE. BRAKE COUNTERSHAFT ON THE GEARBOX. X.7310
X.7420

We send herewith N.sch.2686 shewing the cantilever bearing on the gearbox made as forgings instead of being pieced up. We wish to make this change on both sides of the box, because we believe that the forged piece will be cheaper to produce, and the off-side cantilever can be made to form the anchor for the brake pedal pull off spring.

DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙