From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications for the automatic lubrication of the 'Japan' clutch spigot bearing on a 20/25 HP model.
| Identifier | ExFiles\Box 20\1\ Scan047 | |
| Date | 1st November 1923 | |
| BY.{R.W. Bailey - Chief Engineer} From DA.{Bernard Day - Chassis Design} COPY. X872 DA.{Bernard Day - Chassis Design}4/M6.11.23. c. to SG.{Arthur F. Sidgreaves - MD} c. to Hs.{Lord Ernest Hives - Chair} X.5300 X.5480 X.872 'JAPAN' CLUTCH:LUBRICATION OF CLUTCH SPIGOT BEARING. We send herewith N. sch. 2977, shewing modifications to the existing 20/25 HP. clutch to enable the spigot bearing to be lubricated automatically from the gearbox in the same way as is proposed for Phantom ll. It will be noticed that there is a modification to the gearbox casting, and that the bearing is moved slightly rearward. We also shew on this drawing modifications to N. scheme 2936 to improve the stop for the damper plate, and also the method of securing the starter ring and the clutch spider by studs instead of bolts. We suggest that the device for lubricating the spigot bearing should be applied to the standard 20/25 HP. clutch for purposes of experiment. DA.{Bernard Day - Chassis Design} | ||