From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Fitting instructions for the 40/50 cross steering tube.
| Identifier | ExFiles\Box 67\3\ scan0030 | |
| Date | 22th January 1927 | |
| To Mx.{John H Maddocks - Chief Proving Officer} from Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer} c. EY. Hs{Lord Ernest Hives - Chair}/Rm{William Robotham - Chief Engineer}1/T22.1.27. X8425 40/50 CROSS STEERING TUBE. When fitting up the spring loaded cross steering tube the following particulars should be noted. The steering should be tested with the wheels jacked up and a normal non-spring loaded cross steering tube mounted with the ball ends perfectly free. The load in this condition required to start the steering wheel rotating, applied tangentially, should be 1 1/2 lbs. +/- 1/4 lb. The spring loaded cross steering tube should then be fitted with springs G.75476 and the load adjusted by means of the washers provided until the load, measured tangentially, required to start the steering wheel moving is 6 1/4 lbs. +/- 1/4 lb. This should be produced with a spring set up of .138" Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer} | ||