From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Listing drawings for securing screws, washers, studs, and bearing brackets for Lucas and Rotax models.
| Identifier | ExFiles\Box 51\5\ Scan022 | |
| Date | 1st July 1921 | |
| EXPERIMENTAL - 2 - BY {R.W. Bailey - Chief Engineer} /WER4/EFS. 7. 21. the Ball Bearing quoted on the L.O.P. As soon as possible drawings and L.O.P.'s of the special Shaft and Bearing Bracket for the Lucas and Rotax (if ordered) models will be issued to you. Please receive herewith two blue prints of each of the following drawings, also will SFT. {Mr Swift} and Mr. Broome receive one print of each:- D. {John DeLooze - Company Secretary} 50021 Securing Screw. D. {John DeLooze - Company Secretary} 50022 Washer for D.50021. D. {John DeLooze - Company Secretary} 50023 Stud for Magnet Case. D. {John DeLooze - Company Secretary} 50027 Retaining Nut. D. {John DeLooze - Company Secretary} 50028 Locking Washer. [Handwritten] D 50029 Cover. D. {John DeLooze - Company Secretary} 50044 Distance Bush. D. {John DeLooze - Company Secretary} 50045 Armature Shaft. D. {John DeLooze - Company Secretary} 50048 " " (X) D. {John DeLooze - Company Secretary} 50049 Bearing Bracket. (X) D. {John DeLooze - Company Secretary} 50050 Bearing Bracket. (X) Three prints of each of these are sent one of which should be handed to Mr. Walker (Pattern Shop). BY {R.W. Bailey - Chief Engineer} /WER. [Handwritten signature: Wsh] | ||