Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Blueprint detailing the specifications for a grooved bronze bush.

Identifier  ExFiles\Box 9\7\  07-page124
Date  31th December 1936
  
ROLLS-ROYCE.
4 OIL GROOVES EACH SIDE
.1 WIDE x .015/.020 DEEP
45°
1.6 ± 1/64 DIA.
1.5 DIA.
.066
.068
OUTSIDE DIA: PRESS FIT IN HOUSING.
WHEN PRESSED INTO HOUSING. BORE DIA:
LEAVING FOR REAMERING IN POSITION.
METHOD OF INSPECTION.
THE BUSH SHOULD HAND PUSH FIT INTO RING GAUGE
WHEN IN RING GAUGE TRY BORE WITH PLUG GAUGE.
GO
NO GO
Nº 840-B
DRN: [Draughtsman's symbol]
DATE 31-12-36
MATERIAL
V.F.2. BRONZE .067
MATERIAL SIZE 1 13/16 x .067
ROCKWELL 55-60 1/16 BALL 'B' SCALE.
VANDERVELL PRODUCTS LIMITED
WESTERN AVENUE,
PARK ROYAL,
LONDON, W.3.
DIFFERENTIAL PINION
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙