Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposing the removal of a file from the tool kit due to the introduction of tungsten make and break contact points.

Identifier  ExFiles\Box 35\6\  scan 414
Date  13th April 1928
  
EFC.
X2894
BY/Cgh{W Clough}7/G.13.4.28.

MAKE AND BREAK CONTACT POINTS.

With reference to the tungsten points which we are now fitting on the make and break levers, as you are aware we include a small file in the tool kit for cleaning up the contact points, but we understand that a file is no use with tungsten points, therefore if you agree we propose to delete these files from the tool kits, and at the same time we would like to have your recommendations in regard to what should be done for touching up the contact, so that if necessary instructions can be given to customers, and our instruction books corrected accordingly.

BY/Cgh.{W Clough}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙