Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Complaints from the final test team regarding the awkward fitting of the K.S. petrol gauge.

Identifier  ExFiles\Box 15\7\  Scan146
Date  8th June 1930
  
To. Da.{Bernard Day - Chassis Design} From Hs{Lord Ernest Hives - Chair}/Rn.{Mr Robinson}

X7 530
Hs{Lord Ernest Hives - Chair}/Rn.{Mr Robinson} 2/Mr. 8.6.30.

X4038
X7530
X5530

K.S. PETROL GAUGE.

We have had complaints from time to time from the final test people that the normal method of fixing the K.S. gauge in the instrument board is exceptionally awkward because the clip has to be slipped in from the side. There are often obstructions in the way from the box receptacles in the facia boards.

Any fastening must be of the minimum width to avoid running into the same obstructions.

We are sending you under separate cover, a spring clip and K.S. case which we have modified and which makes quite a good job of holding the gauge head to the dash-board but naturally our modification is only a temporary one and is therefore unsightly.

If Ev.{Ivan Evernden - coachwork} has time perhaps he will get out a design to overcome this trouble.

Hs{Lord Ernest Hives - Chair}/Rn.{Mr Robinson}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙