Instructions for arranging swivelling tungsten contact points on a distributor.
| Identifier | ExFiles\Box 35\6\ scan 042 | |
| Date | 9th May 1921 | |
| X2894 88318 ROLLS-ROYCE LIMITED. INSTRUCTIONS. To: EFC {E. Fowler Clarke - Electrical Engineer} Order No: AA {D. Abbot Anderson} 60 Customer's No.: 1 Re: X2894 Tungsten Contacts with Scrub X1819. To arrange a pair of contact points on a distributor as requested in E {Mr Elliott - Chief Engineer} /GY/5/21. X2894, an insulated point capable of being swivelled around will be required, so that the faces of the points are other than normal to the direction of motion. Fig. 1 shows a suggested arrangement. [Diagram Annotations] condenser contact-piece rod screwed in 'a' to clamp on to rod a. {Mr Adams} slot clamping bolt for screw-point Fig 1. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).