Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Experiments on oil feed to servo cams and bearings, using worsted strands as a metering device.

Identifier  ExFiles\Box 27\1\  Scan222
Date  1st June 1929
  
X3806

To BY.{R.W. Bailey - Chief Engineer} from Hs{Lord Ernest Hives - Chair}/Gy.

Hs{Lord Ernest Hives - Chair}/Gy1/LG4. 6. 29.

We have carried out experiments on the feed of oil to the servo cams and bearing. We found out that the best results were obtained by inserting two strands of worsted bent double and secured in copper wire, as sample herewith, in the hole feeding the servo bearing. In this manner oil was allowed to build up in the recess and meter a certain quantity to the servo cams.

The drip plug feeding the servo should give 15 drops per shot of the pump. We found with this method that 5 drops were metered to the servo cams and 10 to the servo bearing which we consider reasonable amounts.

Hs{Lord Ernest Hives - Chair}/F.Gaye.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙