Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design position report for the Wraith II model, listing parts and their completion status.

Identifier  ExFiles\Box 161a\4\  scan0105
Date  5th August 1936
  
(5)
WRAITH II CONTINUED. DESIGN POSITION.

Closed limousine - "C" steering 1/16th scale. Completed 17.7.36.
Continental touring limousine - "E" steering 1/16th scale. " 17.7.36.
Four door saloon - "E" steering 1/16th scale. In hand.
Continental saloon. - "F" steering 1/16th scale. In hand.
Enclosed limousine "C" steering 1/4 scale. In hand.
Continental touring limousine "E" steering 1/4 scale. In hand.
Headlamp and horn mounting and wing stays. Completed 2.7.36.
Front wings and apron. In hand.
Bonnet side plates and strips. Completed 14.7.36.
Bonnet for 17° and 12° slope. " 14.7.36.
Petrol filter on 2nd crossmember. " 7.7.36.
Petrol tank filler and air vent connection. " 14.7.36.
Modified petrol filter support bracket. " 29.7.36.
Rear jacks. " 17.7.36.
Clutch casing and operating shaft. " 13.7.36.
Modified flywheel starter ring. In hand.
Mod. to floorboard to suit change speed gear gate. Completed 5.8.36.
Foot brake countershaft and floorboard crossmember brackets on cross. Completed 18.7.36.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙