From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of proposed design work for Phantom III, Bentley, and Wraith models, categorized by complexity.
| Identifier | ExFiles\Box 133\4\ scan0062 | |
| Date | 11th February 1937 | |
| [Handwritten text] Gry{Shadwell Grylls}- Have given this list to Trs as example of design work that can be carried on with 1125 [Initialed] Rm{William Robotham - Chief Engineer} [Word 'successfully' handwritten over typed text below] [Typed text] DESIGN WORK NEEDED FOR WHICH SUFFICIENT EXPERIMENTAL DATA IS AVAILABLE AND WHICH CAN BE BROUGHT IN WITHOUT A MAJOR TEAR-UP OF THE CHASSIS. Phantom III. Less costly radiator construction. Raised front engine mounting. Articulated connecting rods. Over speed gearbox. Rear brake layout on the lines of the Continental Phantom III. Bentley Rear brake layout simplified as on 6.B.1V. New Wraith unit adapted to Bentley. Raised front engine mounting as on 6.B.1V. Wraith gearbox adapted with over-drive. Wraith Packard type front suspension. Raised front engine mounting. Simplified radiator and mounting. RESEARCH DESIGN (1) Design unit round single cyl. work of side valve exhaust O.H.V. inlet and get the design costed. (2) Design an alternative drive for the O.H. camshaft engine using any information available from the work done on the supercharger drive. (3) Investigate a Phantom III. engine with side by side connecting rods. (4) Investigate simplest arrangement of one mechanical and one electric petrol pump. MAJOR TEAR UPS. (1) New P.III. frame, simplified front suspension and gearbox on the engine. (2) Bentley III. adapted to whatever suspension is adopted on Wraith. | ||