From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Blueprint for an adaptor tool to facilitate the assembly of Phantom III rear hubs.
| Identifier | ExFiles\Box 92\5\ scan0083 | |
| Date | 17th September 1938 | |
| Ex.I. 61 LAYOUT OF STANDARD REAR HUB ADAPTOR Ex 24189 ADAPTOR FOR HOLDING INNER RACE OF ROLLER BEARING RIGID WITH DISTANCE PIECE WHEN ASSEMBLING HUB ON AXLE TUBE THIS PREVENTS THE POSSIBILITY OF DAMAGE OCCURING TO THE BEARING SHOULD THE INNER RACE BE TOO TIGHT ON THE SPIGOT AND LEFT IN A POSITION AS SHOWN DOTTED ON ASSEMBLY. INTERNAL SERRATIONS SAME AS NUT G53292 ROLLS-ROYCE LTD'S PRINT ROOM 17 SEP 1938 DERBY PH III REAR HUBS ADAPTOR TO FACILITATE ASSEMBLY OF HUBS Ex I 61 | ||