From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
The introduction of a petrol pump in the frame for the Phantom III.
| Identifier | ExFiles\Box 149\4\ scan0375 | |
| Date | 12th July 1937 | |
| BY.{R.W. Bailey - Chief Engineer} EV{Ivan Evernden - coachwork}/WHS. WHS/JJS. Rm{William Robotham - Chief Engineer}/JBD.{John B. Dixon - Fuel Systems} 1263 RHC{R. H. Coverley - Production Engineer}/JMW.1/ENG.12.7.37. PHANTOM III - PETROL PUMP IN THE FRAME. Taking into consideration the promises given by the S.U.Co. we are arranging to introduce the Petrol Pump in the Frame on production on the 117th chassis in 'G' Series, which chassis is due to be sent to the Test Dept. week-ending August 21st. We pointed out to EY. on Friday last that this job has not yet been standardised, but after consultation with Rm.{William Robotham - Chief Engineer} he is of the opinion it should be introduced at the point mentioned above. We mentioned to EY. the scrap involved would be approximately £7. to which he agrees. We are, therefore, arranging to introduce as mentioned above. Will the D.O. please instruct all the departments accordingly. RHC{R. H. Coverley - Production Engineer}/JMW. | ||