Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Revision to the frame side member for a 66-inch rear spring.

Identifier  ExFiles\Box 14\8\  Scan005
Date  22th December 1925
  
X. 7380

To BY.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design}
c. to CJ. Hs.{Lord Ernest Hives - Chair}

DAI/M22.12.25.

EAC. 7. FRAME SIDE MEMBER.

Herewith we send N.sch. 2104 shewing the frame side member revised for a 66" rear spring, in accordance with Mr. Royce's latest instructions.

It will be seen that the rear end of the frame is joggled again in the plan, enabling us to reduce the overhang of the road spring with reference to the frame.

We shall send you full size details of the affected parts as soon as possible.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙