From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Replacement parts for the Bentley 111, 1st and 3rd motion shaft.
| Identifier | ExFiles\Box 99\4\ scan0153 | |
| Date | 14th October 1938 | |
| 428 HPS.{Horace Percy Smith - Experimental Factory Mgr} c. Rm.{William Robotham - Chief Engineer} c. Ray/Gry.{Shadwell Grylls} BY/Ald.{F. Allwood - Experimental Design}5/G.14.10.38. BENTLEY 111. SECTION 6040. 1ST. and 3RD. MOTION SHAFT. Please receive herewith two prints of each of the following :- Ex.S.1112 Inner Cone. 2nd. Speed. 1 off/set. Ex.S.1113 Insert - Outer Cone. 2nd. Speed. 1 off/set. Ex.S.1114 Outer Cone - Overdrive Gear. 1 off/set. Ex.S.1115 Outer Cone - 1st. Motion Shaft. 1 off/set. Ex.S.1116 Outer Cone - 2nd. Speed. 1 off/set. Ex.S.1117 3rd. and 4th. Sliding Piece. 1 off/set. Ex.S.1118 1st. Speed Driven Gear. 1 off/set. The above points have been produced in accordance with instructions received under memo. The parts at present used are replaced by the above as follows :- GB.4098 replaced by Ex.S.1112. GB.4100 " Ex.S.1113. GB.3954 " Ex.S.1114. GB.3960 " Ex.S.1115. GB.4105 " Ex.S.1116. GB.4102 " Ex.S.1117. GB.4103 " Ex.S.1118. Kindly instruct one set of parts. Ald{F. Allwood - Experimental Design} BY/Ald.{F. Allwood - Experimental Design} | ||