From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications for the dipping headlight control mechanism.
| Identifier | ExFiles\Box 61a\1\ scan0309 | |
| Date | 14th December 1927 | |
| X. 4555 To BY.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design} c. to BJ. Hs.{Lord Ernest Hives - Chair} DA{Bernard Day - Chassis Design}2/M14.12.27. EAC.14 DIPPING HEAD LIGHTS. With reference to the question of providing a countershaft for the dipping head light control with the rubber engine suspension, we send herewith N.sch.2525 shewing what we suggest should be done. The bell crank on the dashboard is elongated so as to bring the vertical control rod nearer the steering column, shortening up the rod on the engine foot, otherwise the pieces to be as already instructed. If the special engine foot is/difficulty in fitting these dipping lights to existing cars, we can provide you with a means of getting the inner bearing by bolting on a bracket on to the engine foot. DA.{Bernard Day - Chassis Design} | ||