From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts required for a B.80 Marine water-cooled exhaust manifold.
| Identifier | ExFiles\Box 159\5\ scan0012 | |
| Date | 21th May 1940 | |
| C O P Y. To Rm.{William Robotham - Chief Engineer} c. to Ev.{Ivan Evernden - coachwork} Rm{William Robotham - Chief Engineer}/HH.2/JH.21.5.40. THE PARTICULARS GIVEN ON THIS MEMO HAVE NOT BEEN ISSUED. --------------------- B.80 Marine Section 5230 - Exhaust Fittings PL.169 Water Cooled Exhaust Manifold Please receive herewith three blue prints of each of the following parts, together with an additional print of parts marked @ which have been detailed in accordance with the above chassis:- @ RE.1141 Exhaust Manifold. RH.{R. Hollingworth} and LH.{Mr Haworth} 2 off. @ RE.1142 " Centre. 1 off. RE.1143 Adaptor Exhaust Manifold 2 off. RE.1144 Joint " " (Centre) 2 off. RE.1145 Joint " " (ends) 2 off. The following standard or existing parts will also be required:- E.{Mr Elliott - Chief Engineer} 50922 Core Plug - Exhaust manifold 6 off. KB. 359 Stud - " " (ends) 8 off. K.{Mr Kilner} 4158 Nut - " " (ends) 8 off. K.{Mr Kilner} 9008 S. Washer - " " " 8 off. KB. 368 Stud - " " (centre)4 off. K.{Mr Kilner} 4158 Nut. - " " " 8 off. K.{Mr Kilner} 9008 S. Washer - " " " 8 off. We also attach herewith two prints of each of L.O.P. PL.169 and PL.169 scheme marked up with piece numbers. Rm{William Robotham - Chief Engineer}/HH. | ||