From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting a modification to a dynamo driving motor bearing.
| Identifier | ExFiles\Box 61\2\ scan0029 | |
| Date | 29th June 1925 | |
| To RHC.{R. H. Coverley - Production Engineer} from EFC. X 75 EFCl/T29.6.25. X.1699. DYNAMO DRIVING MOTOR. On Mr. Tooby's bench I have put the commutator end bearing of our driving motor. We have discovered that this requires 3/16" (.187") turned off the bearing towards the armature, in order to allow of the armature taking up its natural position between the pole pieces. Would you kindly have this amount turned off, if possible in time for tomorrow morning. EFC. | ||