From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of specifications for radiator components and their assembly.
| Identifier | ExFiles\Box 9\3\ 03-page014 | |
| Date | 19th January 1937 | |
| -2- Rm{William Robotham - Chief Engineer}/Std.6/JH.19.1.37. (a) No steam valves to be fitted,or (b) Replica of Camel valve to be fitted in top of tank - with the deletion of the yoke, ample room will be available for reproducing the Camel design. (10) Shell to be in mild steel chromium plated - we are not sure whether this is practicable from plating standpoint. (11) Filler cap in Dixtampo chromium plated. (12) Inlet pipes to be in brass casting in one with filler. (13) Channel section supporting radiator to be centrally mounted off a flat rectangular pad of rubber approximately 0.5" thick. Rm{William Robotham - Chief Engineer}/Std. | ||