Potential improvements and testing for an Actuator Magnet on a sequence starter.
| Identifier | WestWitteringFiles\L\April1924-June1924\ Scan81 | |
| Date | 1st April 1924 | |
| ORIGINAL TO E.S. FROM R. {Sir Henry Royce} R2/MB.4.24. Copy to - G.S. EPC. ACTUATOR MAGNET - RR. SEQUENCE STARTER. X9650 This seems much better for the small improvements. Possibly we might make a good job of the bobbin without the thread - (Rivet and sweat.) It should be tested before making expensive tools, because the whole might have to be longer as it seems a long stroke for the length of the bobbin. Could you add say 1" if needed? I fear feeble pull at beginning of stroke. The division in the core looks right but might on test be found better with some other proportions. R. {Sir Henry Royce} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).