Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Standardisation of a radiator shutter control, referencing drawing No. Lec.1093.

Identifier  WestWitteringFiles\C\May1919\  Scan25
Date  1st May 1919
  
To DA.{Bernard Day - Chassis Design} from E.{Mr Elliott - Chief Engineer}
Copy to Gde. [Struck through]
BW. [Struck through]
EPC. [Struck through]
ORIGINAL.
E1/G29/5/19.
2
RE RADIATOR SHUTTER CONTROL. X.3499
We send you herewith drawing No. Lec.1093 shewing the radiator shutter control between the instrument board on the dash and the radiator.
You will note that in applying this mechanism to a car it is necessary to drill three small holes in the main frame of the car, and two small holes with a slot in the dash.
The design is intended to be applicable to existing as well as to new chassis.
We have now completed all the information required for radiator shutters and controls.
Would you kindly proceed to put the necessary work in hand to effect standardisation of same.
E.{Mr Elliott - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙