From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet for various chassis and body components, Issue 2, Sheet 5.
| Identifier | ExFiles\Box 118\1\ scan0112 | |
| Date | 7th May 1945 guessed | |
| SPECIFICATION SPECIFICATION No. [Illegible] ISSUE No 2 SHEET No 5 SEC. No | TITLE | DESCRIPTION | DESIGN No | DETAILS | L.O.P. | REMARKS --- | --- | --- | --- | --- | --- | --- 6150 | SERVO MOTOR | TO SUIT HYDRAULIC FRONT BRAKES & ROD OPERATED REAR BRAKES. | GCD.1375 GCD.1339 | DETAILED | GB.5103 | 30° CAMS. 6181 | HYDRAULIC MASTER CYLINDER | LOCKHEED TYPE | GCD.1375 GCD.1339 | DETAILED | GB.5104 | NEW LINK REQD. 7000 | FRAMES & FITTINGS | LIGHTENED .080 MATERIAL. BENT FRONT PAN .072 SHORTENED FRONT END TO SUIT B.60 ENGINE. FRONT APRON. REAR BUMPER. HIGH FRONT ENGINE MOUNTING. SERVO OPERATED HYDRAULIC MASTER CYLINDER. JACKING PAD TO FRAME MOD: TO SUIT FRONT BUMPER. | PD.432 PD.471 ECD.1431 GCD.1339 PD.492 PL.70 | DETAILED, DETAILED, NOT DETAILED, DETAILED, NOT DETAILED, NOT DETAILED | | FRAME IN WORKS. SUPPLIED BY PARK WARDS. SUPPLIED BY PARK WARDS. 7001 | WING STAYS | SIMILAR TO CRESTA | PD.491 | DETAILED | | 7008 | FRONT BUMPER | TO SUIT HYDRAULIC JACK | PL.70 | NOT DETAILED | | SUPPLIED BY PARK WARD. 7030 | REAR SPRINGS | 50" x 2" "WOODHEAD" REAR SPRINGS. 2.5 TENSION SHACKLE AS B.5 TO SUIT SEMI-FLOATING AXLE. PIPE LUBRICATION TO REAR SHACKLE. | FCD.1365 | DETAILED | | SPRING BOUGHT OUT 7040 | FRONT AXLE | FRONT AXLE PIVOT IN 3 1/2 % NICKEL. YOKE 1% CHROME | | DETAILED | | FLEXIBLE PIPE 7041 | CROSS STEERING TUBE | PARALLEL S/M.{Mr Moon / Mr Moore} TUBES. | | DETAILED | | OTHERWISE AS 11-B.5. 7042 | SPRING SUSPENSION MECH. | LOWER TRIANGLE LEVERS TO SUIT BENT FRONT PAN. FRONT SUSPENSION AS 11-B.5 EXCEPT FOR SPRINGS. TORQUE ARM HOUSING IN ALUM. | | DETAILED | | AS ON 33-G.VII EXCEPT LENGTH OF TUBES 7043 | FRONT BRAKES | HYDRAULICALLY OPERATED FRONT BRAKES. STRONGER PULL-OFF SPRINGS. CAST IRON DRUMS & BZ/RU. LININGS | GCD.1419 PD.264 PD.274 | DETAILED | | FB.3066 SPRING SEATING BUT IN FERODO. TORQUE ARM FB.4452 BUT IN I/M.{Mr Moon / Mr Moore} 7044 | FRONT HUBS | MOD: FRONT HUB END COVER. | PD.485 | NOT DETAILED | | LENGTH OF RODS TO SUIT SHORT WHEELBASE OTHERWISE TO LOP. GB.4193. 7050 | STEERING COLUMN & BOX | WILMOT-BREEDEN STEERING WHEEL. GAS TIGHT JOINT. ALUM BOX | FCD.1256 | PARTLY DETAILED | | STEEL WHEELS 6" TYRES 16"x 4" RIM. 4 PLY TYRES. 18.000 DIA. DESIGN REQUIRED PENDULUM LEVER (NEW LENGTH) 7070 | SIDE STEERING TUBE | PARALLEL S/M.{Mr Moon / Mr Moore} TUBE | | DETAILED EXCEPT FOR TUBE | | NEW ASSEMBLY REQUIRED. | ||