From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts list and blueprint request for a Phantom III Water Pump to be used on an experimental test rig.
| Identifier | ExFiles\Box 149a\1\ scan0133 | |
| Date | 17th September 1937 | |
| C. Rm.{William Robotham - Chief Engineer} BY/NS.{Norman Scott}4/G.17.9.37. 1269 PHANTOM 111 - WATER PUMP. Please receive herewith two blueprints of :- S.CD.52 Mod. to Phan. 111 Water Pump. together with two prints of the following (three where marked *) detailed in accordance with the above scheme.- Ex.S.56 Oil Retainer 1 off. Ex.S.57 Plug Drain Hole. 1 off. Ex.S.58 Felt Washer 1 off. Ex.S.59 Thrust Washer 1 off. Ex.S.60 Driving Pin. 1 off. Ex.S.61 Sealing Ring. 1 off. Ex.S.62 Carbon Ring 1 off. Ex.S.63 Cup - Spring Retainer 1 off. Ex.S.64 Spring 1 off. Ex.S.65 Spindle 1 off. * Ex.S.66 Rotor 1 off. Ex.S.67 End Cover. 1 off. * Ex.S.68 Casing. 1 off. Ex.S.69 Joint Washer 1 off. Ex.S.70 Bolt - Water Pump Casing. 2 off. Ex.S.73 Coupling - Water Pump. 1 off. The following standard parts will also be required :- KB.250 Stud 6 off. K.4006 Nut 6 off. K.9006 Washer 6 off. K.4413 Plain Washer. 1 off. K.9010 Spherical Washer 1 off. K.4316 Nut 1 off. DB.{Donald Bastow - Suspensions}1095 Nut 1 off. One Seager Circlip for 40 m/m.{Mr Moon / Mr Moore} diameter bore. Hoffmann bearing Nos. 115 and 117 - 1 off each. This pump is for test purposes only, and is to be run on experimental camshaft test rig. Kindly arrange to produce one set of the above. BY/NS.{Norman Scott} NS.{Norman Scott} | ||