Specification revision for the Peregrine II - Bumper Chassis.
| Identifier | ExFiles\Box 169\4\ img006 | |
| Date | 20th December 1932 | |
| To Hs. {Lord Ernest Hives - Chair} from RHC {R. H. Coverley - Production Engineer} /WSC. {W. S. Cassel} [unreadable] RHC {R. H. Coverley - Production Engineer} /WSC {W. S. Cassel} 1/IS.20.12.32. PEREGRINE(Experimental Bentley car never produced / Aero Engine) II. - BUMPER CHASSIS. Specification of the above Chassis is revised as follows.- PASSED TO TEST 14.12.32. Radiator LOP.E.100400. Radiator complete to the above LOP. incorporating Marston Matrix - ex 3-Per: II.Chassis. Modified Radiator Stay to RR.Scheme 259. E.100881 Fork - Dash End. E.100882 End Piece-Dash End. E.100883 Radiator Stay Tube. Frames & Fittings LOP.F.100267. The following parts fitted in accordance with RR.Scheme 264 - Rear Damper Suspension to suit fitting of J.III type Dampers. 4-F.100641 Support Bracket. 2-F.100642 Distance Piece. 4-F.100636 Support Brackets. F.100643 Brazing Arrgt: Battery Crossmember. Front Axle Control Dampers LOP.F.100622-RR.Scheme 246. W.S.3497. J.III. type Dampers complete to the above LOP. Alun: Main Cylinders. F.59260 Bush-Large-Rocking Shaft-(Ungrooved) F.59275/6 Rocking Shafts - Undrilled. F.59293 Pistons. F.100668/9 Main Levers to suit 4 1/2° Pivot Lean. Loads set H.P. 90 lbs. L.P. 90 lbs. -continued- | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).