Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Change gear lever, speedometer drive, and lubrication of the thrust bearing.

Identifier  ExFiles\Box 15\5\  Scan224
Date  14th December 1931
  
BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design}
C. to SG.{Arthur F. Sidgreaves - MD} HS.{Lord Ernest Hives - Chair}
X 7310.
DAL/14.12.31.
P. 2. CHANGE GEAR LEVER, SPEEDOMETER DRIVE, ETC. X.7310

We despatched to you last night N.sc.3386 shewing the change gear lever, speedometer drive, etc, on above box.

It has been decided that for the moment we shall do nothing to isolate the change gear lever from the movement of the box.

We should like the lubrication of the thrust bearing on the speedometer drive to be investigated. It appears as though sufficient oil should be carried up as shewn, but it may be that this is not so, when we will make some suggestions as to how it can be improved.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙