Instructions for a new 'one-piece' folded battery box design for the Wraith III chassis.
| Identifier | ExFiles\Box 164\3\ img029 | |
| Date | 10th June 1937 | |
| WST 6021 C. Rm {William Robotham - Chief Engineer} /Wst. BY {R.W. Bailey - Chief Engineer} /RD.5/B.10.6.37. WRAITH III. Battery Box - Section 7290. The instructions previously issued for battery boxes on Wraith Chassis have been of the riveted-up type to facilitate assembly of small quantities, but when this comes on to production we shall use a 'one-piece' type of folded battery box and we have accordingly produced a design for same together with the LOP. and details. The prints of these parts are handed to you herewith for reference purposes. It is not desired that a box of this type should be put in hand for experimental chassis. DW.304 - Battery Box LOP. DW.300 - Assembly of Battery Box. DW.298 - Battery Box. DW.299 - Guide. DW.301 - Bolt. DW.302 - Bolt. DW.303 - Washer. We also send you herewith, blueprint of :- DW.211 - Battery. Batteries to this drawing have already been obtained for the experimental chassis, and this also is issued for reference purposes only. BY {R.W. Bailey - Chief Engineer} /RD. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).