From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Tests carried out on thermostat controls and bye-pass holes to prevent radiator freezing.
| Identifier | ExFiles\Box 38\2\ Scan103 | |
| Date | 9th June 1920 | |
| X.3456. To R.{Sir Henry Royce} From Hs.{Lord Ernest Hives - Chair} c. to CJ. c. to Bn.{W.O. Bentley / Mr Barrington} c. to E.{Mr Elliott - Chief Engineer} c. to Da.{Bernard Day - Chassis Design} c. to By.{R.W. Bailey - Chief Engineer} c. to Oy. c. to Na.{Mr Nadin} Hsl/LG9.6.20. X.3563. RE THERMOSTAT CONTROL. X.3456. We have carried out tests with a car fitted with a Thermostat comparing different sizes of bye-pass holes in the main valve operating in the circuit between the engine and radiator. The idea of the bye-pass hole is cheifly in order to provide a vent when filling up and draining the engine of water. The hole also allows a small quantity of hot water to leak through into the radiator even though the Thermostat control valve is closed. This leakage of hot water into the radiator should assist in reducing the risk of the radiator freezing up when the car is used in extremely cold climated. It should, however, be understood that when a Thermostat is fitted to a car it will be necessary to take precautions to prevent the radiator freezing up when the car is used in cold climates. We should recommend that the lower half of the radiator was blanked off during the Winter months. We should like to hear from Oy. what the practice is in American to prevent radiators freezing up when Thermostats are fitted so as to short-circuit the radiator. We have measured the temperature at the outlet of the radiator and found that under average running conditions Contd. R.R. 199 (150) (SD670 19-7-17) MP.18685 | ||