Wiring and fittings for the Goshawk 11, requesting cable lengths to be added to blueprints.
| Identifier | ExFiles\Box 45\3\ Scan182 | |
| Date | 31th July 1922 | |
| X4075 To MHC. (12 prints) By {R.W. Bailey - Chief Engineer} /HEB {H. Biraben} 10/AT31.7.22. c.c. to EFL. c.c. to TB. c.c. to EFC. {E. Fowler Clarke - Electrical Engineer} X.4075.-GOSHAWK(Aero Engine)(Codename for 20HP Car / Aero Engine after Kestrel(Aero Engine)) 11. WIRING & FITTINGS SECTION 7360. Kindly receive two blueprints of each of the following:- F.51121 Battery to Starter Switch 1 off per chass F.51122 Starter Switch to Motor 1 " " " F.51123 Battery to Earth Connection. 1 " " " F.51124 Battery to Dist. Board. 1 " " " F.51650 N.S. Tail Lamp Plug to O.S. Plug. 1 " " " F.51651 Tail Lamp Plug to Dist.Board. 1 " " " Kindly note we have not filled in the lengths of these cables and have sent two sets of prints. We should be pleased if you will kindly fill in the lengths on one set and return to this Dept: as soon as possible. These lengths you will be able to fix up for us after you have wired up the chassis to the latest particulars. they will then be given to the Works so that cables may be cut off to length for a large number of chassis. By {R.W. Bailey - Chief Engineer} /HEB. {H. Biraben} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).