Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of parts suitable for standardisation, including their description and status.

Identifier  ExFiles\Box 154a\3\  scan0288
Date  12th June 1937 guessed
  
-2-
3.B.1V. Parts suitable for standardisation(continued)

Ref. Description. Notes.

Ex.17856 Short pendulum lever to give lighter steering. Sheet issued.

Rm.{William Robotham - Chief Engineer}284/5 Improved assembly of studs with rubber washers in ends of front bumper bar. Sheet to be issued.

Rm{William Robotham - Chief Engineer}/Gry.{Shadwell Grylls} Larger bolts in axle tube flanges. An increased number of bolts has been instructed for Production as this scheme not applicable to present standard axle.

Rm{William Robotham - Chief Engineer}/Wst. Petrol gauge meter (marked B.V.1 ) (Internal modific-ation) Sheet to be issued.

Rm{William Robotham - Chief Engineer}/JBD.{John B. Dixon - Fuel Systems} 'Superflexit' petrol piping. Sheet issued.

Rm{William Robotham - Chief Engineer}/Std. "Klingerite" material for water joints on engine. Sheet issued.

Rm{William Robotham - Chief Engineer}/Std. Water Temperature thermometer with special capillary to eliminate noise trans-mission. Sheet issued. Slight crack in soldered connection to bulb.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙