From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of repair and fitting work to be carried out on a Bentley 3.B.50 car.
| Identifier | ExFiles\Box 111\3\ scan0132 | |
| Date | 25th January 1940 | |
| 800b To HPS.{Horace Percy Smith - Experimental Factory Mgr} c. HPS{Horace Percy Smith - Experimental Factory Mgr}/RH.{R. Hollingworth} Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager}1/BA.25.1.40. Bentley 3.B.50. We are sending the above car into the fitting shop for the following work to be done. (1) Repair Radiator shell and shutters as necessary. (2) Fit new N/S. headlamp and N/S. Electric horn. (3) Straighten out front bumper. (4) Remove long necked ball pins from cross steering tube centre joints and fit standard wall pins. (5) Fit complete set of standard B.V. parts to rear end of side steering tube. (6) Fit rear engine mounting rubber to be supplied by Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager} (7) Reline servo with material to be specified by Rm{William Robotham - Chief Engineer}/RGB. (8) Fit undershield around the servo to keep water out of same. Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager} | ||