From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Weight reduction and material substitution for engine components, particularly for a lighter experimental Phantom engine.
| Identifier | WestWitteringFiles\N\October1925-December1925\ Scan135 | |
| Date | 23th November 1925 | |
| (2) (16) SEE WHAT FURTHER WEIGHT CAN BE REMOVED FROM FLYWHEEL AND CLUTCH. (17) SEE WHAT ADDITIONAL WEIGHT CAN BE REMOVED FROM CRANKSHAFT BY BORING OUT THE PINS TO A LARGER DIAMETER. With regard to your memo. BY3/H231125.. we do not think the following parts should be made in duralumin:- E.72896. SILENCER BRACKET. E.71343. CENTRE PEDESTAL. E.70648. BRIDGE PIECES. E.71556. BRIDGE PIECES. but all the remaining pieces mentioned in this same memo. we think are quite safe for the lighter material. As regards the first mentioned item - E.72896. we should prefer to substitute the lighter sheet metal construc-tion which we are using in other places, for holding up the silencer. As previously mentioned we shall not be able to do any of this work at WW. for some little time to come, and we should be glad if you could do what is possible in Derby to carry out the proposals for producing a lighter experimental Phantom engine. In the meantime we will study the drawings already sent through for aluminium cyl. head and block, and let you know if we think these require any modification. E.{Mr Elliott - Chief Engineer} [STAMPED TEXT] RECEIVED TO DEC 1925 | ||