Drawing specifications, issues with a slack tape fit, and a request for new windings for an Actuating Box.
| Identifier | ExFiles\Box 68\4\ scan0165 | |
| Date | 23th November 1914 | |
| COPY. [Handwritten: X.1397 (crossed out) X1640] 23/11/14. Mr Wormald for Mr Bailey. G.4455 Drg. states slots to be .075" + 5" square corner bottom. G.4466. Drg. states wire to be .064" - 5 The tape is too slack, these should be a tight fit and the slot the same section as the tape allowing the same to be soldered in, at present the solder will not hold. The tape ought to be a tight fit so that in the event of the solder melting with the heat it will still have a hold. Please advise. [Handwritten: X.3428] Can you let me have the new windings for the Actuating Box yet ? p. Wor. {Arthur Wormald - General Works Manager} Mcr. [Watermark: DICKINSON BOND] [Handwritten at bottom: original sent to Mr Bailey 23/11/14] | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).